55% aluminized zinc silicon

55% galvanized product is a steel plate with special coating. Its main features and applications are as follows:

Coating composition and characteristics:

Main ingredients:55% aluminum, 43.5% zinc and a small amount of silicon and other trace elements. This particular composition ratio makes the aluminized zinc sheet have excellent corrosion resistance.

Corrosion resistance:Compared to traditional hot-dip galvanized sheet, 55% galvanized sheet has 2-5 times more corrosion resistance, even more than aluminum sheet, so that it can maintain good performance in harsh environments.

Widely applied:Commonly used in building roofs, walls, electrical cabinets, home appliances, automobiles and other fields, it is ideal for these industries due to its excellent corrosion resistance and processability.

Processing and maintenance:Processability: 55% galvanized sheet has good processing properties and is easy to cut and mold, but during processing, the exposure of the cutting edge should be avoided as much as possible in case of rapid corrosion.

Maintenance considerations:Once cut, rust-resistant paint or zinc-rich paint should be used to protect the edges to extend the life of the sheet.

Environmental impact and economy:

Environmental protection: The production and use of 55% aluminized zinc sheet has less impact on the environment and is in line with the current green and low carbon development trend.

Economy: Due to its long life and excellent corrosion resistance, 55% galvanized sheet can reduce maintenance costs during use and has good economic benefits.

In summary, 55% galvanized sheet is a material with high corrosion resistance and wide application, suitable for use in a variety of harsh environments. It has broad application prospects in construction, home appliances, automobiles and other fields.

Aluminized zinc silicon production line

The 55% aluminum-coated zinc-silicon production line is a complete set of equipment specially used for high-temperature hot-dip plating of a layer of zinc alloy plating on the steel surface. Its detailed introduction is as follows:

Composition

Including opener, welding machine, storage machine, degreasing cleaning unit, continuous annealing furnace, zinc pot, air knife, mobile air cooling, finishing machine, drawing and straightening machine, fingerprint resistant coating machine, shearing machine, rewinding machine, etc.

Features

Configured with strip chemical cleaning or high efficiency electrolytic cleaning section, using full radiant tube heating technology, cooling of strip after annealing and reduction using circulating jet protective gas cooling, drawing and straightening machine and finishing machine can effectively improve finished product surface and plate shape quality, in addition, using recycle flue gas waste heat technology, control system using vector frequency conversion speed regulation, CPC and EPC correction Control technologies such as fieldbus.

Advantage

The fully automatic hot-dip galvanizing production line realizes the automation of the whole process from raw material feeding, pretreatment, galvanizing and post-treatment to finished product discharging, ensuring the quality and uniformity of the galvanized layer, which greatly improves production efficiency and product quality compared with traditional manual or semi-automatic production lines, reducing the impact of human factors on the production process At the same time, it has a high degree of environmental protection, effectively reducing pollution to the environment.

Applications

It is widely used in steel, machinery, home appliances, construction, automobile, aviation and other industries.